Custom Leather cushions

Please Don't purchase this listing. Cushion projects need to be quoted individually depending on size, leather, and other options. This is to give you an idea. This cushion was made in The Leather Hide Store's Restoration Distressed Wicker. This is a slimline 1" thin cushion with top stitching. When finished with the foam and the Dacron wrap (batting that does around the foam), it will end up being about 1.5" thick.

Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions. I charge by the square foot, so my customers are not charged for leather that is wasted, you are not charge by the hide you use. I use overages for other small projects so that you are not charge for that. Please keep these things in mind when asking for an estimate.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) if you require covers only, or cushion inserts as well.

C) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.
** PLEASE NOTE: It is very difficult to estimate cost realistically without knowing your fabric selection. If you have yet to select a fabric, please wait until that time to ask for an estimate, as I do take the time to go through each estimate one by one to give a detailed response to each customer. If you plan to supply your own fabric, I cannot estimate how much fabric you will need for your project without knowing what fabric you will be using.

D) if you would like piping or stitching on your cushion

E) your zip code

Please be advised that all custom made products may take up to 4-5 weeks for delivery

This listing includes ONE cushion cover in the size indicated.
If you are also ordering a seat back cushion, be sure to deduct the thickness of your seat cushion from height of your back cushion.
When ordering, order the size closest to the size you need. You will enter the exact size(s) you need in the personalization area. Note that sizes need to be in 1/2" increments. If unsure it's best to size down. If you want to have them custom made kindly drop us a message and we will be happy to be a part of your project.

For sizing purposes, I refer to width as left to right. Width will be the zipper side of the cushion. Depth will be from front to back, or in the case of a seat back cushion the depth will be the height of the cushion.

All cushions in this listing will be boxed cushions with no piping - like shown in the photo. If you want piped cushions, I have another listing for that. The cushions will be all in the same leather. All cushions are fully leather: front, bottom and all sides, sides are constructed in leather. This allows you to flip your cushions and use both sides.
The leather used is a semi aniline top grade cowhide leather with a protective coating. It is an upholstery leather, so is thick and with proper care (conditioning) will last a lifetime.

All cushions are made-to-order. Please see turnaround times at the time of placing your order.
For special orders and estimates, please contact me.

This listing includes ONE cushion cover in the size indicated.
If you are also ordering a seat back cushion, be sure to deduct the thickness of your seat cushion from height of your back cushion.
When ordering, order the size closest to the size you need. You will enter the exact size(s) you need in the personalization area. Note that sizes need to be in 1/2" increments. If unsure it's best to size down.

For sizing purposes, I refer to width as left to right. Width will be the zipper side of the cushion. Depth will be from front to back, or in the case of a seat back cushion the depth will be the height of the cushion.

All cushions in this listing will be boxed cushions with no piping - like shown in the photo. If you want piped cushions, I have another listing for that. The cushions will be all in the same leather. All cushions are fully leather: front, bottom and all sides, sides are constructed in leather. This allows you to flip your cushions and use both sides.
The leather used is a semi aniline top grade cowhide leather with a protective coating. It is an upholstery leather, so is thick and with proper care (conditioning) will last a lifetime.

All cushions are made-to-order. Please see turnaround times at the time of placing your order.
For special orders and estimates, please contact me.

This listing includes ONE cushion cover in the size indicated.
If you are also ordering a seat back cushion, be sure to deduct the thickness of your seat cushion from height of your back cushion.
When ordering, order the size closest to the size you need. You will enter the exact size(s) you need in the personalization area. Note that sizes need to be in 1/2" increments. If unsure it's best to size down.

For sizing purposes, I refer to width as left to right. Width will be the zipper side of the cushion. Depth will be from front to back, or in the case of a seat back cushion the depth will be the height of the cushion.

All cushions in this listing will be boxed cushions with no piping - like shown in the photo. If you want piped cushions, I have another listing for that. The cushions will be all in the same leather. All cushions are fully leather: front, bottom and all sides, sides are constructed in leather. This allows you to flip your cushions and use both sides.
The leather used is a semi aniline top grade cowhide leather with a protective coating. It is an upholstery leather, so is thick and with proper care (conditioning) will last a lifetime.

All cushions are made-to-order. Please see turnaround times at the time of placing your order.
For special orders and estimates, please contact me.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.

Dimensions:
Bench Cover - 52 x 16 x 3 Inch
Headboard Cover - 52 x 16x 2 Inch


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.
Optional: Ties included to accomodate Woven Bench with Back
Made in India.

Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.

C) if you would like piping or stitching on your cushion

DIMENSIONS
Overall: 25" wide x 25" deep x 4" thick
Weight: 5.25 ounce

CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.


For this listing:
- please select the color leather you would like (please order samples in advance if you are unsure)
- the size that is the closest to the size you need
- enter your exact size needed in the personalization area
- top stitching will be added unless you request otherwise

To add straps, ties, etc.. Please use message or personalization box

- please note also if your cushion is larger than the hide itself (usually wider than about 5-6 feet depending on the hide), then it will need to be seamed together and there will be a top stitch on your cushion. Generally there will be a larger center piece with two smaller side pieces, so there would be two vertical top stitches. This would be on both the top and bottom of the cushion. The top and bottom of the cushion will always line up

NOTE: Because our hides are premium top grain leather, natural markings such as brands, finished scratches and bites may be present. Typically, these markings are very subtle and are considered by most as the "signature" of fine leather.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.


For this listing:
- please select the color leather you would like (please order samples in advance if you are unsure)
- the size that is the closest to the size you need
- enter your exact size needed in the personalization area
- top stitching will be added unless you request otherwise

To add straps, ties, etc.. Please use message or personalization box

- please note also if your cushion is larger than the hide itself (usually wider than about 5-6 feet depending on the hide), then it will need to be seamed together and there will be a top stitch on your cushion. Generally there will be a larger center piece with two smaller side pieces, so there would be two vertical top stitches. This would be on both the top and bottom of the cushion. The top and bottom of the cushion will always line up

NOTE: Because our hides are premium top grain leather, natural markings such as brands, finished scratches and bites may be present. Typically, these markings are very subtle and are considered by most as the "signature" of fine leather.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.
Optional: Ties included to accomodate Woven Bench with Back
Made in India.

Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.

C) if you would like piping or stitching on your cushion

DIMENSIONS
Overall: 40" wide x 14" deep x 3" thick
Weight: 5.25 ounce

CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.


For this listing:
- please select the color leather you would like (please order samples in advance if you are unsure)
- the size that is the closest to the size you need
- enter your exact size needed in the personalization area
- top stitching will be added unless you request otherwise

To add straps, ties, etc.. Please use message or personalization box

- please note also if your cushion is larger than the hide itself (usually wider than about 5-6 feet depending on the hide), then it will need to be seamed together and there will be a top stitch on your cushion. Generally there will be a larger center piece with two smaller side pieces, so there would be two vertical top stitches. This would be on both the top and bottom of the cushion. The top and bottom of the cushion will always line up

NOTE: Because our hides are premium top grain leather, natural markings such as brands, finished scratches and bites may be present. Typically, these markings are very subtle and are considered by most as the "signature" of fine leather.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.


For this listing:
- please select the color leather you would like (please order samples in advance if you are unsure)
- the size that is the closest to the size you need
- enter your exact size needed in the personalization area
- top stitching will be added unless you request otherwise

To add straps, ties, etc.. Please use message or personalization box

- please note also if your cushion is larger than the hide itself (usually wider than about 5-6 feet depending on the hide), then it will need to be seamed together and there will be a top stitch on your cushion. Generally there will be a larger center piece with two smaller side pieces, so there would be two vertical top stitches. This would be on both the top and bottom of the cushion. The top and bottom of the cushion will always line up

NOTE: Because our hides are premium top grain leather, natural markings such as brands, finished scratches and bites may be present. Typically, these markings are very subtle and are considered by most as the "signature" of fine leather.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.
Optional: Ties included to accomodate Woven Bench with Back
Made in India.

Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.

C) if you would like piping or stitching on your cushion

DIMENSIONS
Overall: 52" wide x 16" deep x 2" thick
Weight: 5.25 ounce

CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-aniline have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.

This leather bench cushion creates a cozy place to put on your shoes, converse with friends or set out tomorrow's outfit. It quickly attaches and detaches with leather straps that discreetly tie around the bench's back posts.

Expertly crafted from aniline dyed buffalo leather.


Things to know in advance about leather: the construction of leather is going to be about double that of other materials for a few reasons: 1) it requires not just an industrial sewing machine, but one that works with leather, the standard industrial machine will not handle working with leather upholstery; and 2) leather is unforgiving, therefore it must be worked with slowly and methodically. Once it is pierced it cannot be undone, the hole shows forever therefore it takes precision and exacting and 3) leather itself is expensive but also since it does not come by the yard but is on a hide, the sizing is odd and therefore there is much more waste, especially with larger projects like cushions.

For an estimate, please send me the following:

A) exact cushion measurements including width, length and thickness of each cushion and number of each cushion (if cushions are not rectangular please provide a photo)

B) Depending on the size of your cushion or cushions your leather piece may need to be seamed together. Decorative seams are very common as you cannot always get large pieces of leather of the same hide. If this is the case I will make you aware of it and give you options.


CARE AND MAINTENANCE
Leather Care

Never use detergents, polishes, preservers or saddle soap. They can remove natural oils.
Dust or vacuum for routine maintenance.
Do not place in direct sunlight; it will lighten or discolor leather over time.
Dab spills immediately with a soft white cloth dampened in a water solution (3 parts water, 1 part gentle soap). If spill penetrates leather, use lukewarm water and a soft white cloth to massage stain and surrounding area. Blot with a dry cloth and allow leather to air dry.
Most surface scratches will fade over time if you rub them with your fingertips. Friction and heat from rubbing helps to redistribute wax in surrounding areas to cover the scratch. Not all scratches have the same depth, and this may not work on deeper scratches.

Composition & Construction

Our leather upholstered products are constructed from semi-aniline leather. The full-grain or top-grain leathers are soaked in transparent non-toxic dye, with no subsequent pigmented finish coats applied. Dye penetrates the hides, letting the natural grain show through.
Semi-anilines have natural markings that vary from hide to hide. They also have color variations due to the leather’s ability to accept dyes differently in various areas of a hide. Markings and shading distinguish genuine leather from man-made materials. Appreciating shade differences among hides also means appreciating them on individual furniture pieces, because no two pieces can be produced from a single hide.
Our leathers appeal to customers who find the natural color variations, markings and patina of pure aniline leathers unique and beautiful. They may not appeal to customers who want uniform color and surface commonly seen on less expensive leathers that are heavily corrected and pigmented.


For this listing:
- please select the color leather you would like (please order samples in advance if you are unsure)
- the size that is the closest to the size you need
- enter your exact size needed in the personalization area
- top stitching will be added unless you request otherwise

To add straps, ties, etc.. Please use message or personalization box

- please note also if your cushion is larger than the hide itself (usually wider than about 5-6 feet depending on the hide), then it will need to be seamed together and there will be a top stitch on your cushion. Generally there will be a larger center piece with two smaller side pieces, so there would be two vertical top stitches. This would be on both the top and bottom of the cushion. The top and bottom of the cushion will always line up

NOTE: Because our hides are premium top grain leather, natural markings such as brands, finished scratches and bites may be present. Typically, these markings are very subtle and are considered by most as the "signature" of fine leather.